5015 Blower Silencer - M3 Bolt Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked race85com design but I needed to use M3 bolts instead of the snap on.
- Ocena
- 4,6 / 5
- Polubienia
- 53
- Pobrania
- 369
- Wydruki
- 5
- Wyświetlenia
- 1606
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked race85com design but I needed to use M3 bolts instead of the snap on. No other changes were made. There are three versions depending on how thick you would like the material between the bolt and the blower to be. I find 2mm just fine myself.
Edit: Added versions that have a bolt only on one side, in case you have a situation where you are only using a single bolt to hold the blower on.
You will need supports on the bolt hole locations (although I forgot to turn mine on and it still worked somehow…) No supports anywhere else.
Per race85com's description: “Measured dampening is 4dB on my 5015 S1 hotend mount, measured on bed.”