Diffuser for Disco on a Stick and Daylight on a Stick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Diffuser for Disco and Daylight on a Stick (https://github.com/VoronDesign/Voron-Hardware/tree/master/Daylight)
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1017
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This includes 2 files:
1: A remix of the Daylight diffuser that @setapart2_252450 made; I added built in support for the screw head pockets, and sunk the hole deeper to make the screws sit flush.
2: After doing this I realized it would not work for my Disco on a Stick, so I modeled my own based off of it. The original model had a diffuser thickness of .2mm, I made mine .6mm since I used transparent PETG. If you want it thinner you can just cut off the bottom 2 layers in your slicer.