Liczymy pasujące modele…
The Modell is made out of Transparent PLA its a Powerout LED defusor layerhight 0,3 linewidt0,6 speed 15mm/sec No Fan raft and VASEmode no Bottom and Top layer 8min of print KEEP windshielded with some paper
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Simple diffusor for Nitecore MT21C. Suction fit on either end of the flashlight. Vase mode Einfacher Diffusor für Nitecore MT21C. Saugende Passung für beide Enden der Taschenlampe. Vasenmodus
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Not sure the model of light fixture I have but the old clips break easily and were hard to find. Hope this solves a problem for someone.
Wydruk około 9,13 €–11,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I came across this calculator for an acoustic diffusor and whipped up a basic static model of it: http://www.mh-audio.nl/Acoustics/DiffusorCalculator.asp They call it a skyline diffuser. Update 12/17/2022 : it looks like this link has…
A 150x150mm example is included, to generate your own, you need to have openSCAD installed on your computer. Parameters should pop up on the right.
A simple LED rail with diffusing cover. I use it to recycle old led stripes. Soldered JST-XH connector. Used Prusament ASA for the diffusor with 0.16mm layer height and 0.24mm for the first layer. Snap-in design for easy creation of…
Mounts the Vifly Strobe to the base mount without tape and at same time turns the 3 white LEDs to “legal” green for night flights in Germany which is far brighter than the single green LED on the Vifly. Works as diffusor which turns the…
Parametric Flash Diffusor (Diffuser) Light Easy to print - no supports, no brims Clamps lightly to your flash Size and angle parametric Print in white or transparent filament. (Off-white filament will give your pictures a slight tint.)…
I needed a diffusor for the LED lantern lightning for my kids. I placed a 14000mcd yellow LED inside and it looks great. the bottom hole fits for a 5mm LED with a shrink tube Print Settings Printer: uArm Swift pro Rafts: Doesn't Matter…
I tried printing it in: PLA PETG Both worked with my 3W Bulb. Choose accordingly to the heat development of your bulb. Make sure your lamp doesn't get too hot!!!
PLA / PETG / TPU -> transparent Works all fine, no support needed Update: Ich habe die Decke oben nochmal bearbeitet. Sie ist jetzt oben etwas Dicker. Der Druck hat sehr gut funktioniert mit TPU Transparent. Und sry ich hatte einen Fehler…
printed in PETG Transparent - only 3f filament needed 100% infill Mounted to the original LCD casing with double sided tape
Diffusor for the BLF Q8 flashlight. Printed with bq transparent filament, 0.1mm layer height & 30% infill for better diffusion. v1 is ~60mm high vs. ~110mm for v2
My sponge filter was a little too loud for me, so I developed this diffuser to reduce the volume a little. The air bubbles are reliably broken up and the bubbling has become much more pleasant for me. The diffuser was designed for a 16mm…
Simple holder + inserts to bring life into models eyes works as Bounce Card replacement tested with Godox TT685 II, TT600, Yongnuo 560 II, Neewer NW880 should work fine with Canon/Nikon or other strobes too if they have similar head, but…
I wanted to bend a flash diffusor to test the really cool extremely cheap but really decent quality microscope lens macro tube create by thenickdue . 5 minutes in Fusion360 and one hour to print later… Light from above the subject! This…
Just a simple diffusor to put onto an Olight i1R2 Pro lamp. Print it in something transparent, I used PETG.
Difdusor for Prusa MINI LED set
My sponge filter was a little too loud for me, so I developed this diffuser to reduce the volume a little. The air bubbles are reliably broken up and the bubbling has become much more pleasant for me. The diffuser was designed for a 16mm…
diffusor for the printed Prusa LED-Light Rail from Lord_Syrus: https://www.printables.com/model/132588-u-channel-for-sethbons-led-prusa-light-bar print in white PLA and attach with glue
Piedini per stabilizzare un canna di bambo in modo che non rotoli. Sono adatti per canne di 5-6 cm di diametro, altrimenti occorre ridimensionarli. Li ho fissati al bambù con un filo per braccialetti. Ho forato il bambù, i piedini hanno…
This probably works better as a diffusor, than a Dampening Panel. I thought that it might trap sound in the small chamber. Cant test it for myself because my printer is slow af :( but Ill be happy if someone uploads a make :) The…
Ciao a tutti! Sono un creatore amatoriale che ha appena scoperto la magia della stampa 3D. In questo spazio raccolgo i miei primi passi: piccoli progetti nati per essere utili nella vita di tutti i giorni. Sto ancora imparando, quindi…
Put this on the head of your C2 flashligh. Works with C2, C2 Pro (Nichia, WR etc). Won't work with C2 Pro Max. Add fuzzy skin to the bulge in the slicer to get better diffusion. Transparent PETG is an optimal choice for the filament.…
Check your leds temp, if they get too warm another version will be available soonish
Its an easy to print adapter for your convoy S2+ or every similar lamp with approx. 24mm. The diffussor seperates the light to the side, so you can use it as a light on a table. When you print 2 of them, the lamp stands stable. When you…
Just a small and portable diffusor for Led Lenser P7R Just printed another one and got some pretty bad overhangs with 0.3 resolution. with 0.15 everything was fine. So maybe play with the resolution if you are not happy with the result.
An LED diffuser, specially made for the Tomlov DM201, which may also be used with other digital microscopes. The light is scattered more evenly, which reduces reflections and color distortions.
diffusor for the printed Prusa LED-Light Rail from Lord_Syrus: https://www.printables.com/model/132588-u-channel-for-sethbons-led-prusa-light-bar print in white PLA and attach with glue
Just put a few drops of Essential Oil on the cotton stick and voilà. I made a version for vent with horizontal flaps.
I needed dual color led and the stock RED diffuser was replaced with one printed from transparent PET-G.
When trying to mount the original injection-molded housing of the MK4S xLCD to the original prusa enclosure there are several issues: the holes for the screws do not align the position is to high, the xLCD would block the doors. the…
I had printed the @perform3d version on my Prusa MK4 and XL and I really loved the very bright rendering. I then changed my MK4 to MK4S and printed the version of @hachleitner_1769169 which fits perfectly on the MK4S, but I found that the…
Left some holes for magnets but mine actually fit without magnets. Not fully optimized, but it works and fits. Printed with Bambu A1 mini standard settings and standard PLA filament. Feel free to optimize material, design and print…
Light Diffusor for Webcam - this two piece diffusor sits on top of the monitor, just like the webcam. There are two screens, square and one with a cut out for the webcam. Use a piece of filament for the hinge.
Piedini per stabilizzare un canna di bambo in modo che non rotoli. Sono adatti per canne di 5-6 cm di diametro, altrimenti occorre ridimensionarli. Li ho fissati al bambù con un filo per braccialetti. Ho forato il bambù, i piedini hanno…
Hooks for the diffusor and styling attachments of the Panasonic Hair Dryer EH-NA63
This model is an addition to the famous original Prusa Printer enclosure (https://www.prusaprinters.org/prints/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr). I have added this passage because it was a bit annoying at the…
A slim diffusor for the Klarus G15 flashlight. Use a transparent PLA. I also tried with black PLA on the bottom part, I thought it looks better, but does not affect the functionality. .20 layer height and supports is recommended, rounded…
Ersatzohren für den Diffusor von Primavera
Wer kennt das nicht, einmal kurz nicht aufgepasst und schon fällt das Studiolicht beim aufschrauben auf das Stativ runter oder man greift es etwas fester und schon ist der Diffusor gesprungen oder es fehlen Teile davon. So ging es mir…
This probably works better as a diffusor, than a Dampening Panel. I thought that it might trap sound in the small chamber. Cant test it for myself because my printer is slow af :( but Ill be happy if someone uploads a make :) The…
Because the diffusers I found on thingiverse do not fit well on my nitecore tup (they go too hard to slide on the lamp) - I made a new one. It fits on my lamp and leaves the display free. No support and opening upwards - in my case in…
Added an integrated diffuser Model separated into 4 parts so that it fits on a Prusa XL
Sorgt beim Zehner Luftauslass für eine Ablenkung der Luft zur Seite. Rechts/links frei waehlbar. Unsichtbar zu verbauen.
Printed with TPU 95A 8% honaycomb infill, no supports needed if printed upside down
Upgraded bumper ( https://www.printables.com/model/1277060-rear-bumper-for-tamiya-tt-02-diffusor-for-yaris-ga ) Bigger diffusor for the TT-02 chassie with Yaris body Printed in TPU 95A with 8% honeycomb infill Protects the car and…
A small and portable macro flash diffusor for the Olympus 60mm f/2.8 macro lens that attaches on the bayonet mount of the lens. It allows you to still attach filters and close up lenses. It also fits the Olympus 25mm f/1.8 lens, as they…
Please don't forget to give me a Like. :) Replace the tiny LED strip on your SV08 with an LED Daylight Stick (version for Voron 2.4 XXL stick 370mm like this one from aliexpress). The main model is for the right side of the top frame from…
A light diffusor for some gutter-mounted solar LED lights... exactly like these: https://smile.amazon.com/gp/product/B07881ZY97/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I needed to spread the light out to make some cool solar…
Print Instructions Material: PLA/PETG/HDGlass (Clear, See Through) Layer height: 0.2 mm or 0.15 mm Perimeters: 2 or 3 Infill: 15 % Supports: No
Mold for making the little LED diffuser for the Stealthburner.
Normally the spot light of the Phillips Hue Centura ceiling spot is too narrow in order to be used as a in-wall mounted stair light. This diffusor widens and softens the spot very strongly and hence makes it suitable for stairs. The…
I didn’t find an fitting diffusor for my NeoPixel ring light, so that’s my own attempt. Its a snap fit when using the original Adafruit one with 12 LEDs.
Da ich schon eine selbstgemachte Saunakelle mit dem gleichen Funktionsprinzip habe und sie regelmässig und mit grossem Erfolg verwende ,dachte ich ich versuche mal eine aus dem 3d-Drucker individuell zu designed . Die Kelle wurde in PETG…
I added the diffusor directly on the matrix. My paper diffusor was not sitting nice and flush on the matrix. When I saw other matrices with integrated diffusor, I made this one for the mazerunner inspired clock. (Which doesn't need to be…
This is for the following product from Action: https://www.action.com/de-de/p/3217439/led-pixeltafel/ I didn't liked the look of the display so I designed a thin diffuser an a thicker frame to make it look like a picture frame. The…
Diese Halterung habe ich für einen Diffusor meiner Frau erstellt, um ihn an eine unserer Skadis Lochplatten zu hängen.
Jula meec 18v lyskaster / work lamp accessories. Diffusor and hook. Printed the diffusor in white PETG, in vase mode, 0.8 walls with a 0.6 nozzle and just pressfit in. the walls in the design is 1.5mm, so you can just print it normally…
Ciao a tutti! Sono un creatore amatoriale che ha appena scoperto la magia della stampa 3D. In questo spazio raccolgo i miei primi passi: piccoli progetti nati per essere utili nella vita di tutti i giorni. Sto ancora imparando, quindi…
Put this on the head of your C2 flashligh. Works with C2, C2 Pro (Nichia, WR etc). Won't work with C2 Pro Max. Add fuzzy skin to the bulge in the slicer to get better diffusion. Transparent PETG is an optimal choice for the filament.…
Diffusor for Philips Hue led strip on top of a headboard. Made to fit the dimensions of a MK3S+ Print as many as needed for 140-220 headboards. Right and left angle is included. Fuse together with either the male/female connections or…
I'm running a pair of them on my video camera housing! Print the model in 0.2mm, this should produce 3 layers in front of the LEDs.
🚫 NUR FÜR DEN PRIVATEN GEBRAUCH: Der gewerbliche Verkauf von Ausdrucken dieses Modells ist unter dieser kostenlosen Lizenz strengstens untersagt! 🛒 GEWERBLICHE VERKAUFSLIZENZ: Sie möchten die gedruckten Aquarium-Becher legal auf eBay,…
This is a model for a pond waterfall feature. It clams the water and produces a wider water stream. The box has a 19mm or 3/4in hose connector and internal walls to clam and distribute the water, creating a wider water stream to create a…
Inner diameter is 14,61mm. Sealable by o-ring with inner diameter 13mm and cross section 2,5mm.
Ein kleiner Diffusor mit Gardena-Anschluss, mit dem moeglichst viel Wasser mit geringer Stroemungsgeschwindigkeit punktuell zur Verfuegung gestellt werden kann. Nuetzlich z.B. bei der Bewaesserung von Baeumen und Straeuchern, aber auch…
aus weißem PLA drucken und unter LED nachtischlampe kleben um das Licht dauerhaft zu dimmen
Die Idee Einen alltags tauglichen Luftfilter (mit Filter und leisen Ansaug-Geräuschen) konstruieren, welcher optimiert ist für eine Drehzahl oder im besten Fall für drei Drehzahlbereiche (tief, mittel, hoch) um das Optimum aus einem 2…
Made a simple Diffusor for a LED RGB Candle-Light in Tinkercad so it looks better in the modded little Halloween Pumpkin I also made. Easy to print. Maybe you must print it in 38mm (X/Y) size to fit better. Depends on how good you set…
Remix based on model from Stuff Maker
If you print this with a red filament, you have a dual color diffused light and a white spotlight.
Turn your penlight or flashlight in to a handy camping light. Great for ambient light when camping or as a tool light for working on cars etc. Could probably be user for signaling as the “baton” lights upp pretty bright (depending on…
Essential Oils Diffusor for AirCare Evaporative Humidifier Model 836000HBCN For the diffusor pad, you can use a small piece of felt or several layers of paper towels.
Printed it with PLA (Glow in the Dark) Infil 20% 0,2mm Layerhight 2 Contour lines Seems to be sturdy. Not fieldtested yet.
A drink/bottle coaster diffusor with simple LED lighting. The goal was to construct a small housing for a LED sticker without support. I hope you like it. It consists of a lid and bottom that are held together with a bayonet catch. The…
A simple diffuser for a LED torch (14mm diameter). See the effect on the pictures. Printed with matte white TPU
I printed the Harry Potter Deathly Hallows Table Lamp ( https://www.thingiverse.com/thing:5617018 ) for my wife. To cover the light outlets I created these diffusers in TinkerCAD. Printed with 0.4 nozzle in concentric printing, first…
new diffusors for christmas https://www.printables.com/de/model/64058-spotlights-lampshade-v2-gu10-or-12-v-led-diffusor- You probably know all of these cheap lights that contain GU10 lamps. Most of these lights are kept very simple and…
A simple diffuser that is printed flat and can be folded to be hung from your Christmas lights. Instructions: Print with 0,2mm layer height and play with the different top layer patterns your slicer offers. You can change the filament…
Print in 99.5% size for perfect fitting. It's 0.6mm height, so it's 3 layers with .2 nozzle. Use polyester batting for non-pointing light.
A Diffusor for 8x8 RGB LED Matrix To be printed with two colors - Layers 0-3 with white PLA/PETG and the remaining parts using any other color you like. For best “pixels” a black frame is recommended. You can also print the entire piece…
Macro Flash Diffusor A simple attachement for the Nikon 40mm 1:2.8G DX Macro Lens. It allows to use the internal flash of your DSLR to light macro shots and is mounted on the lens hood snap-in-flange. (it snaps in like the lens hood) Why…
A diffusor that can be used with the NiteCore MH12GT or any other flashlight that has a head of 25.4mm wide.
I made the original a little bigger and added a Diffusor. The Diffusor was printed in transparent PLA and with no bottom skins. Hope you like it, pls post a make!
PLA/ PETG / TPU -> transparent Works all fine, no support needed Ich habe die Originaldatei (stl) nicht mit hochgeladen, da die .3mf Datei so funktioniert muss nur gedruckt werden mit den Einstellungen. Mit PETG / PLA Transparent / TPU…
Wer den LED-Frame for IKEA SKADIS pegboards gedruckt hat und nach selbst geduckten Diffusoren sucht, ohne fummeln in die kleine schiene, kann die hier gern nutzen. Es werden die einzelnen Dateien wie folgt benötigt für die Skadis 36x56cm:…
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
Similar to the original but works with generic LED strips instead of the custom PCB. The strips can be up to 14mm wide and is slid in from the back, similar to the diffusor. To mount, choose one of the clips from the original and glue…
This is a bulb diffusor for newly LED stripe bulbs. The clear bulbs are often to bright - even if they only have 6W. So I designed this diffusor that fits to the longer, nice looking design LED bulbs. I printed it in self glowing PLA -…
I remixed the LED diffusor/separator unit to fit the SMD's on the LED matrix. I used and scaled the separator from another great project - the matrix clock.
