Evolve Carbon GT front fenders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since the summer is short in Sweden, might as well kit the board with fenders to ride when it's a little wet outside
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Since the summer is short in Sweden, might as well kit the board with fenders to be able to ride when it's a little wet outside :)
These fenders fits the Evolve carbon gt snuggly. Not sure if the truck axles are the same on other boards, but I've included the FreeCAD file so you can change it to fit yours. I printed them in abs and they do warp a little so you may have to use a raft and/or brim.
Since it's an fdm print they are sensitive to vibrations. I'd try to avoid rough surfaces when using them.