1 / 5
Silica Gel Container for IKEA Samla 22l (XL Remix) — zdjęcie 1
1 / 5

Silica Gel Container for IKEA Samla 22l (XL Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix of the great design by "NOT your favorite engineer" for the Prusa XL or any other large format printer.

Ocena
5 / 5
Polubienia
26
Pobrania
179
Wydruki
1
Wyświetlenia
1135
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

I realy liked the design by NOT your favorite engineer. It is very stable and needs a relativly low amount of filament, in relation to its sice. Since I own an XL, I though it would be even better if it would be two pieces instead of four per box. This makes it hold even better and the rolls cannot slip in between the pieces. For that I had to slightly redesign the lid, such that it opens to the outside. My model needs about 90g filament per part, so 180g per box. On the XL you can print up to 5 of these in one go.

Tagi