Stackable magnetic soldering clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small magnetic clamp for holding wires and small components while soldering. Stackable and with print-in-place hinge!
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 645
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introduction
How many times have you ruined your small wires when trying to use a too powerful clamp to hold them in place before soldering? Well, that won’t happen anymore with these small magnetic clamps.
Perfect for small gauge wires and tiny components. You can stack multiple clamps on top of each other while soldering tiny Arduino wiring harnesses or other projects where you need to hold multiple wires simultaneously.
Requirements
- 2x 6mm x 3mm magnets for the clamp
- 1x 6mm x 3mm magnet for the stand
Printing
All the files are already in the correct orientation. Simply slice the files or pick up the .gcode files I’ve provided.
Assembly
It’s a good idea to use a drop of superglue to make sure that the magnets stay in place. Especially PLA will loosen over time…
The easiest way to place the magnets is to use a second clamp as a ram while you squeeze with your fingers. The clamps have ”male“ and “female“ sides and are simple to align.