Stackable magnetic soldering clamp
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.42 – €0.51 net (excluding VAT)
For file: Soldering Clamp_0.15mm_PLA_MK3S_42m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.46 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 41.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A small magnetic clamp for holding wires and small components while soldering. Stackable and with print-in-place hinge!
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 88
- Makes
- 0
- Views
- 645
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introduction
How many times have you ruined your small wires when trying to use a too powerful clamp to hold them in place before soldering? Well, that won’t happen anymore with these small magnetic clamps.
Perfect for small gauge wires and tiny components. You can stack multiple clamps on top of each other while soldering tiny Arduino wiring harnesses or other projects where you need to hold multiple wires simultaneously.
Requirements
- 2x 6mm x 3mm magnets for the clamp
- 1x 6mm x 3mm magnet for the stand
Printing
All the files are already in the correct orientation. Simply slice the files or pick up the .gcode files I’ve provided.
Assembly
It’s a good idea to use a drop of superglue to make sure that the magnets stay in place. Especially PLA will loosen over time…
The easiest way to place the magnets is to use a second clamp as a ram while you squeeze with your fingers. The clamps have ”male“ and “female“ sides and are simple to align.