Bernina 700/800 Bobbin holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bobbins for the Bernina 700 and 800 series are a little odd. They aren't symmetrical -- one side is bigger than…
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 142
- Wydruki
- 2
- Wyświetlenia
- 659
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Bobbins for the Bernina 700 and 800 series are a little odd. They aren't symmetrical -- one side is bigger than another. This is an organizer to pack these fairly densely while keeping them accessible with thread color visible.
I designed this with parameterizable configurations, but it's designed in Fustion360, so I can't make it configurable on Thingiverse (unless someone wants to show me how!). I've uploaded a couple of configurations (3 wide/6 long, 6 wide/6 long), but it's easy to kick out different configs, so if you want a different arrangement just post a comment requesting one, and I should be able to upload a new .stl fairly quickly.
Print Settings
Printer Brand:
UltiMaker
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: MatterHackers Build PLA Green
Notes:
Print settings almost don't matter on this. I printed the ones in the pictures here with the fastest settings and a 0.8mm print head, and the bobbins fit. Higher resolution could improve things cosmetically, but not functionally.
I measured the asymmetrical bobbin and built a model of an outline, and subtract that out from blocks half the height of the bobbins.
I've uploaded the Fusion360 files for the Bobbin slot and the parameterized organizer.
Category: Organization