1 / 1
Auxiliary fan center part for Xol Uhf
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Center section, scaled in Z to work with XOL UHF this orients the ducts perfectly in line with the nozzle area on my xol
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
Center section, scaled in Z to work with XOL UHF
this orients the ducts perfectly in line with the nozzle area on my xol on a Trident 300 with 250ish zheight without blowing all air against the ducts
in the first couple layers some of the air might hit the bed but the ducting is scaled to have the exit be half way bed, half way across the bed on the first couple layers!