1 / 6
iFixIt like box for Precision 117 in 1 chinese screwdriver kit — zdjęcie 1
1 / 6

iFixIt like box for Precision 117 in 1 chinese screwdriver kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box/tray for Precision 117 in 1 chinese screwdriver kit

Ocena
0 / 5
Polubienia
20
Pobrania
59
Wydruki
0
Wyświetlenia
424
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
GNU General Public License v3.0

First of all thanks for downloading my model :D

 

Had to include whatever this is

 

Foam:

So in my testing i came to conclusion that you will need a foam rectangle size 100mm x 100mm and thickness about 2mm. I used low density packing foam/EPE foam(packing material). You can buy it, but any foam/packing material at least 2mm will do the job.

Magnets: 

  • If you are printing the magnet version you will need 14 (2*7) 6x2mm magnets
  • You just need to glue magnets to holes, make sure that magnets are orientated correctly
  • you can buy them on Aliexpress, Amazon.de, Amazon.com or any other shop.

 

The chinese kit that i made box for (Aliexpress, Amazon.de, Amazon.com):

 

This is cross-section of box with and without magnets:

Without magnetsWith magnets

 

 

Print settings: 

  • Speed: standard for your printer
  • Infill: at least 10%
  • Number of walls: at least 2

Change log:

v1.0-Initial release.
v1.1-little tweaks to screwdriver and shaft, and bigger angle for hinge. 

 

Have fun printing! (and ask if you need any help)

If you wish you can donate on my ko-fi page.

Tagi