1 / 6
iFixIt like box for Precision 117 in 1 chinese screwdriver kit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box/tray for Precision 117 in 1 chinese screwdriver kit
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 59
- Makes
- 0
- Views
- 424
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
First of all thanks for downloading my model :D
Had to include whatever this is 

Foam:
So in my testing i came to conclusion that you will need a foam rectangle size 100mm x 100mm and thickness about 2mm. I used low density packing foam/EPE foam(packing material). You can buy it, but any foam/packing material at least 2mm will do the job.

Magnets:
- If you are printing the magnet version you will need 14 (2*7) 6x2mm magnets
- You just need to glue magnets to holes, make sure that magnets are orientated correctly
- you can buy them on Aliexpress, Amazon.de, Amazon.com or any other shop.

The chinese kit that i made box for (Aliexpress, Amazon.de, Amazon.com):

This is cross-section of box with and without magnets:
| Without magnets | With magnets |
![]() | ![]() |
Print settings:
- Speed: standard for your printer
- Infill: at least 10%
- Number of walls: at least 2
Change log:
v1.0-Initial release.
v1.1-little tweaks to screwdriver and shaft, and bigger angle for hinge.

