1 / 1
Bracket for power strips with Type-K sockets (Danish sockets)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket for mounting power strips with Type-K sockets.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A power strip bracket.
Made for power strips with Type-K sockets (Danish sockets).
Will probably also fit power strips with socket C, E and F, but this is not tested.
Requires the following dimensions around the first/last socket:
Width: ~ 44mm
Height: ~ 35mm
Also requires that the thickness of the wall on first/last socket to be between 1.50-2.00 mm (see image)
Edit:
Added a V2 that does not need supports and has wider screw holes.
Print settings:
| Filament: | Any |
| Nozzle: | 0.4mm |
| Layer Height: | 0.2mm |
| Infill: | 20% |
| Support: | Yes/No |
| Estimated Material: | 20g |
| Estimated Print Time: | 40min |