Modular cooling system for Neptune 3 Pro - Hornet Fangs Quad 5015
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hornet Fangs Quad 5015 - powerful cooling system for Neptune 3 Pro print head. Easy print with No Support
- Ocena
- 4 / 5
- Polubienia
- 28
- Pobrania
- 58
- Wydruki
- 4
- Wyświetlenia
- 943
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Hornet Fangs Quad 5015 - powerful cooling system for Neptune 3 Pro print head.
Easy print with No Support (only brim for parts cooling ducts)
It is more compact evolved version of Wasp Fangs Quad 5015
System requires:
- four 5015 24V turbo fans
- buck converter and extra wiring for significantly quieter printing (even single 5015 fan working at 12V - 50% of blow power is efficiently cooling hotend heatsink)
- 1x heatsink cooling base (or 2x modular heaatsink cooling base parts, RIGHT one is included in files, to print LEFT one flip model in slicer). NO SUPPORT needed. Split base version is also easier to attach to printhead comparing to single base. 4x washers are going in between base mounts and print head body.
- 2x printed part cooling fangs. RIGHT fang is included in files, to print LEFT one flip it in slicer. Brim is recommended for better adhesion.
- 4x M3x12 bolts, 4x M3 washers, 2x M4x18 bolts, 2x M4 nuts, 4x M4 washers
- 1x printed mount bar for alignment sensor, requires 1x M3x8 , 1x M3x12, 1x M3 nut
Check more details on setup and cooling system benefits in Wasp Fangs Quad 5015
Improvements of Hornet Fangs Quad 5015:
- Sharper flat blades of formed air flows for parts cooling
- Precise angular tilting of parts cooling flow without risk of hitting print parts
- More compact location of all four turbo fans
- Improved visibility of hotend nozzle from higher angles
- Double-safety of heatsink cooling - airflow keeps it cold even if one fan stops working
- More rigid and easy mounting to printhead
- All four fans are easy removable without need to deal with bolts
UPDATE (2025-03) : Added nut holder part to simplify assembly and easier tightening when parts are mounted on printhead.
UPDATE (2024-07) : I moved buck converter inside printer frame near Mainboard. It allows to just redirect fan port wiring from Mainboard to converter and then using stock wiring of printhead to connect heatsink fans to reduced voltage.
UPDATE (2024-03-07) included modified part cooling duct for taller hotend like Volcano
UPDATE (2024-05-11) included part cooling duct with wider mount for wider spacing between 5015 fans (V7C_parts_R1_longer_mount).
Category: 3D Printer Parts