NAA Mini Revolver Rear Sight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a much needed sight picture to these tiny little fellas. Mechanical zero by design.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 1202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Much needed for these tiny little things, designed for the blade front sight revolvers only. Too tall for the bead/post front sight style from NAA. Use a small dab of your favorite hard adhesive like 2-part epoxy or super glue. Can also use a small piece of thin double sided tape. Mine holds pretty well.
Make sure to rotate these sights to print on their face, I recommend a smooth buildplate of some sort so that the holes are still round when printed.
This is quite an old model of mine, I believe the fiber optic model was made for 1.5mm optic rods.