Slow Stick FPV Plane with Carbon Fiber Arrow Shafts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build your own FPV Slow Stick with all 3D printed parts, carbon arrow shafts, and foam board.
- Ocena
- 5 / 5
- Polubienia
- 393
- Wydruki
- 17
- Wyświetlenia
- 22 173
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Build and fly your own Slow Stick FPV platform.
Video:
Features:
Dual Carbon Fiber Arrow Shaft
Steerable Tail Wheel
Bolt-on Wing and mounts
DJI Camera Platform
3D printed body parts including Wheels
Carbon Fiber Landing Gear
PDF files for Wings and Tail (Tiled PDF for A4 and US LETTER)
All up weight with 2200mAh 3S pack is 980g -- this includes full FPV system, OSD, GPS.
List of additional parts can be found here:
Full Amazon List: https://amzn.to/4gJSib0
5mm Foam Board
Motor 880KV - D2836 Brushless: https://amzn.to/4aCwefI
ESC - 30A with 3A BEC: https://amzn.to/4ezdCPm
Propeller - APC 10x5E: https://amzn.to/3vnQOOI
Servos - MG90D Digital metal gear: https://amzn.to/3weywzB
3S 2200mAh Lipo battery
Camera - DJI Vista / Link: https://amzn.to/4xYHBro
Goggles - DJK FPV Goggles: https://amzn.to/4woCdwp
Carbon Arrow 7.5mm OD - 340 - 32 inch: https://amzn.to/4gvHr2R
30e or 50e Size Carbon Fiber Landing Gear: https://flight-model.com/products/carbon-fiber-landing-gear-undercarriage-for-yak-30e-50e-electric-airplane
Aluminium M4×Φ3×14mm axles for landing gear: https://flight-model.com/products/1-set-%CF%863-%CF%864-%CF%865mm-wheel-axles-shaft-adapter-nut-screw-airplane-wheel-accessories-tapping-hexagonal?variant=37627145126053
Nuts and Bolts
¼-20 x 1 inch nylon bolts for wings with nuts
4-40 x 1 inch screws for leading edge to use as wing pegs (or 1/8 carbon)
Collar for steerable wheel: https://www.dubro.com/products/nickel-plated-dura-collars?variant=27880684423
3mm or 1/8" Carbon fiber tube for Main wing leading edge and trailing edge: https://flight-model.com/products/10pcs-3mm-diameter-500mm-length-carbon-fiber-rods-matte-surface?variant=35612287631525
1.5mm Push Rod and Tail Wheel: https://amzn.to/4jADnhs
Added Biplane Option for wing mounts 3/18/2024. Use a ¼ inch wood dowel to join them at the top.
Printing Settings:
I used Overture Matte PLA: https://amzn.to/3wxdw7p
3 wall layers
35% in-fill
0.2mm layer height
Some Parts print best with supports but not required
Please note that each printer may print slightly different. It is a good idea to print one part to test the fit on the carbon arrow. The parts should be snug but able to move with pressure. You do not want them loose or sliding around. If needed apply scaling when you slice the parts. You can always add a dab of hot glue to secure a loose piece.
Use the full length of the recommended Carbon Fiber Arrows (31 inches) – no need to cut them down. Most of the parts placement is determined by their location on the arrow shafts. The motor mount, battery tray, and front wing mount will all be touching. Use the photos and video as reference for placement. As with all Slow Sticks, you can move things around to your liking or as CG may dictate.
*Please reach out with questions. Thank you!