1 / 9
Nerf Rival Pathfinder XXII-1200 Custom Barrel & Attachments — zdjęcie 1
1 / 9

Nerf Rival Pathfinder XXII-1200 Custom Barrel & Attachments

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replaces the stock barrel for one that can easily swap between different barrel attachments

Ocena
5 / 5
Polubienia
20
Pobrania
129
Wydruki
1
Wyświetlenia
1112
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial

Replaces the stock barrel for one that can easily swap between different barrel attachments

 

This project is a work in progress - feedback is greatly appreciated!

Expect slight changes to future revisions

 

PRINTING:

  • Recommended to print with PETG or ABS for impact resistance
  • Does not require supports if printed as oriented in file
  • Requires good bed adhesion - consider adding a brim
    • Bedslingers may have troubles with the barrel wobbling during print
  • STL files included in .Zip file
  • Each part has a Z-Seam channel designed into the model. Try to align Z-Seams to these channels if your slicer does not do so automatically ( for cosmetic reasons only )

 

INSTALLATION:

  1. Open blaster shell
  2. Remove & set aside internal pump assembly
  3. Remove stock barrel & muzzle
    • Stock barrel is glued into place - use a flat head screwdriver to gently pry the barrel out of the shell (see images)
  4. Insert new barrel where the old one was
    • The side of the barrel with the “TOP” text should face upwards
    • Clean any remaining glue/residue from the channels the barrel fins will slot into or else the barrel may not seat correctly (see images).
  5. Replace the internal pump assembly
  6. Replace the outside blaster shell
    • Pay attention to get the barrel fin slotted into the channel of the upper shell
  7. Screw blaster shell together
    • There may be a slight gap between each half of the blaster shell where the new barrel is. This will pull together when the screws are replaced
  8. Blaster is now ready for new custom attachments!

 

BARREL ATTACHMENTS:

When screwing attachments onto the barrel try to keep the Z-Seam channel facing downward ( keeps it out of sight and looks cosmetically better )

.Zip includes the .STEP file for the attachment coupling so anyone can easily design their own barrel attachments

 

DISCLAIMER:

  • Please print barrel attachments with bright orange filament or finish with orange paint for your own safety!

 

Please visit our Etsy shop to see what else we do!

https://kettlefishcreations.etsy.com

 

Tagi