Nerf Rival Pathfinder XXII-1200 Custom Barrel & Attachments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the stock barrel for one that can easily swap between different barrel attachments
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 129
- Makes
- 1
- Views
- 1,112
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
Replaces the stock barrel for one that can easily swap between different barrel attachments
This project is a work in progress - feedback is greatly appreciated!
Expect slight changes to future revisions
PRINTING:
- Recommended to print with PETG or ABS for impact resistance
- Does not require supports if printed as oriented in file
- Requires good bed adhesion - consider adding a brim
- Bedslingers may have troubles with the barrel wobbling during print
- STL files included in .Zip file
- Each part has a Z-Seam channel designed into the model. Try to align Z-Seams to these channels if your slicer does not do so automatically ( for cosmetic reasons only )
INSTALLATION:
- Open blaster shell
- Remove & set aside internal pump assembly
- Remove stock barrel & muzzle
- Stock barrel is glued into place - use a flat head screwdriver to gently pry the barrel out of the shell (see images)
- Insert new barrel where the old one was
- The side of the barrel with the “TOP” text should face upwards
- Clean any remaining glue/residue from the channels the barrel fins will slot into or else the barrel may not seat correctly (see images).
- Replace the internal pump assembly
- Replace the outside blaster shell
- Pay attention to get the barrel fin slotted into the channel of the upper shell
- Screw blaster shell together
- There may be a slight gap between each half of the blaster shell where the new barrel is. This will pull together when the screws are replaced
- Blaster is now ready for new custom attachments!
BARREL ATTACHMENTS:
When screwing attachments onto the barrel try to keep the Z-Seam channel facing downward ( keeps it out of sight and looks cosmetically better )
.Zip includes the .STEP file for the attachment coupling so anyone can easily design their own barrel attachments
DISCLAIMER:
- Please print barrel attachments with bright orange filament or finish with orange paint for your own safety!
Please visit our Etsy shop to see what else we do!
https://kettlefishcreations.etsy.com