Nylon Handle Adapters - Voron 2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle adapters for sourced handles (link in description). Supports 3mm panel and 3mm foam.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted top handles for my V2.4, but didn't want to utilise a potentially weak 3d print.
I've designed these quick to print (and in my experience more than strong enough) adapters for pre-made handles. Here are the ones I've sourced https://www.amazon.co.uk/gp/product/B00AOBHWKQ/.
May fit https://a.aliexpress.com/_EGT7iW5 although untested (looks to be the same mould).
The design has clearance for 3mm panels with 3mm foam. I've included .step files should you wish to alter to fit your use-case. Will likely work on the sides also if needed, but untested.
Print one of each (left and right) for a single handle.
Printed in ASA with standard Voron print settings (40% infill, 4 walls etc. etc.)
Hardware required:
- 2x M5x25mm BHCS (per handle)
- 2x M5 T-nut (per handle)
Happy printing!