Poster Holder with magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poster holder with magnets and holes for a string
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Poster Holder
Can be made in many ways.
| Standard | Width | Height | Comment |
| A1 | 840 | 594 | Landscape mode |
| A1 | 594 | 840 | Portrait mode |
| A2 | 594 | 420 | Landscape mode |
| A2 | 420 | 594 | Portrait mode |
| A3 | 420 | 297 | Landscape mode |
| A3 | 297 | 420 | Portrait mode |
| A4 | 297 | 210 | Landscape mode |
| Width | Width for printbed | Left | Middle | Right | =Parts |
| 840 | 210 | 1 | 2 | 1 | 4 |
| 840 | 168 | 1 | 3 | 1 | 5 |
| 594 | 198 | 1 | 1 | 1 | 3 |
| 594 | 148.5 | 1 | 2 | 1 | 4 |
| 420 | 210 | 1 | 0 | 1 | 2 |
| 420 | 140 | 1 | 1 | 1 | 3 |
| 297 | 148.5 | 1 | 0 | 1 | 2 |
The .3mf file names are PosterHolder_[width]_[width_for_printbed]x[Parts].3mf
The printer should pause at 2.6 mm and ask for insertion of magnets
You will need four sets of .3mf-prints for a poster, two up and two down
You will have to glue a set together, and maybe use a clamp while the glue is hardening. Before you glue join the parts to see that they are all right
I have made them with two magnets 5 x 2 mm in each part
For each set make sure that the magnets have the same polarity, i.e. for one set all must be south or north (not mixed)
A good way to insert the magnets is to have them in a stack and insert the end of the stack and 'break off' a magnet in the hole.
I can make other sizes at your request, also for magnet size
Magnets bought from supermagnete.com, a German company
Item number: S-05-02-N52N Disc magnet Ø 5 mm, height 2 mm