Poster Holder with magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Poster holder with magnets and holes for a string
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 33
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Poster Holder
Can be made in many ways.
| Standard | Width | Height | Comment |
| A1 | 840 | 594 | Landscape mode |
| A1 | 594 | 840 | Portrait mode |
| A2 | 594 | 420 | Landscape mode |
| A2 | 420 | 594 | Portrait mode |
| A3 | 420 | 297 | Landscape mode |
| A3 | 297 | 420 | Portrait mode |
| A4 | 297 | 210 | Landscape mode |
| Width | Width for printbed | Left | Middle | Right | =Parts |
| 840 | 210 | 1 | 2 | 1 | 4 |
| 840 | 168 | 1 | 3 | 1 | 5 |
| 594 | 198 | 1 | 1 | 1 | 3 |
| 594 | 148.5 | 1 | 2 | 1 | 4 |
| 420 | 210 | 1 | 0 | 1 | 2 |
| 420 | 140 | 1 | 1 | 1 | 3 |
| 297 | 148.5 | 1 | 0 | 1 | 2 |
The .3mf file names are PosterHolder_[width]_[width_for_printbed]x[Parts].3mf
The printer should pause at 2.6 mm and ask for insertion of magnets
You will need four sets of .3mf-prints for a poster, two up and two down
You will have to glue a set together, and maybe use a clamp while the glue is hardening. Before you glue join the parts to see that they are all right
I have made them with two magnets 5 x 2 mm in each part
For each set make sure that the magnets have the same polarity, i.e. for one set all must be south or north (not mixed)
A good way to insert the magnets is to have them in a stack and insert the end of the stack and 'break off' a magnet in the hole.
I can make other sizes at your request, also for magnet size
Magnets bought from supermagnete.com, a German company
Item number: S-05-02-N52N Disc magnet Ø 5 mm, height 2 mm