SV06 fanduct 5015
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
fanduct for SV06 with 5015 fan PRINTINPLACE
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Made this SV06 fanduct for a 5015 fan with plug and play use. Made from 1 single part so no glueing together and NO SUPPORT needed when printing, since I already added handmade supports for perfect printing. SO just place the stl/step in the slicer and export to your printer - all overhangs are covered.
external parts needed:
5015 fan with adapter for printer
2x M4x25 countersunk screws for the 5015 fan
2x M4 hexnut for 5015 fan
4x M3x18 or M3x15 for fanduct
Please report feedback to me when facing problems with the print/finished product and fav my project - otherwise enjoy the part :)
I mostly run the fan at 70-80% for lower noice emission and cooling is still far sufficient.
| Please leave a like if you enjoy my design. Also feel free to check out my other uploads. :) |