Tonna yagi antenna clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tonna yagi antenna clamps 4 and 6 mm éléments 16 and 20mm boom.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 1276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Heavy-Duty Clamps for Tonna VHF/UHF Yagi Antennas (144 / 432 MHz)
Replacement antenna element clamps specially designed for Tonna VHF (144 MHz) and UHF (432 MHz) Yagi antennas.
Official Tonna spare parts are discontinued and no longer available in stores. This 3D printed model allows you to restore, repair, or extend the life of your classic Tonna antenna with a custom-fit, durable replacement clamp designed for outdoor use.
Technical Specifications
Element Diameters Supported: 4 mm and 6 mm
Boom Sizes Supported: Fits both 16 mm and 20 mm square booms
Hardware Options: Standard M4 or M5 screw + nut, or heat-set threaded inserts (M4 or M5)
Recommended Print Settings
To ensure high mechanical strength and resistance to outdoors conditions:
Material: PETG, ABS, or ASA (Avoid PLA for outdoor use)
Infill: 15% to 100%
Perimeters / Walls: 2 to 6 wall loops
Layer Height: 0.20 mm for the 1st layer, then 0.15 mm (or standard 0.20 mm)
Support & Feedback
If this model saved your antenna, please leave a Like and share your Makes!
Feedback and suggestions for future improvements are always welcome.
Check out my profile for other radio amateur and antenna 3D designs.
73 de F1NSR Yannick