Fighting Board Mount for 2020 Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for boards like GP2040-CE Fighting Boards or Brook UFB's! Mounts to 2020 Extrusion via M3 T-nut.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
A very simple mount for PCB's like open sourced GP2040-CE Fighting Boards or the Brook UFB.
This mounts to a piece of 2020 Aluminum Extrusion with two drop-in M3 T-Nuts and M3*6 screws which should sit flush. The board mounts in place with another four M3 screws.
Made this as part of an ongoing leverless controller build that uses laser cut acrylic panels and 2020 extrusion for the enclosure. Surprised that there were mounts available, but none that actually attached this way, so hope this helps someone! Will likely add different revisions depending on my own needs.