Ozito Water Pump Filter Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filter wrench to remove the clear outside housing and access the filter for cleaning.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
The Ozito Pre-Filter kit clear housing was impossible to remove by hand after it had been outside for a couple of weeks. None of the water filter wrenches I had were of suitable size and nothing else I had would wrangle it off…
… so I made the wrench.
Recommend printing just the bottom layers (around 1 to 2mm thick) for a test fit. It should feel snug at the middle part of the clear housing, if not, adjust by +1% X & Y until it does.
Tip: Remember to put silicone grease on the threads and O-ring on the clear housing to make it easier to remove next time.
Printing:
- PLA+
- 6 walls on a 0.6mm nozzle
- 50% cubic infill
- 5 top and 5 bottom