1 / 20
Golden Twin FPV RC Plane with Foam Plans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super fun FPV platform with Twin Motors for clear view FPV with landing gear
- Ocena
- 0 / 5
- Polubienia
- 12
- Wydruki
- 0
- Wyświetlenia
- 1155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
The Golden Twin is one of my favorite FPV platforms that gives you the full experience taking off and landing (landing gear) as well as a clear unobstructed view in the first person.
Included hear are all the STL files as well as the PDF and CAD (DXF) files for the foam board plane. You can print and cut your full kit. Below are the list of recommended parts to complete the build.
- Landing Gear Kit with Wheels: https://amzn.to/3uqCuVm
- DJI Runcam Vista Link: https://amzn.to/3SKFjZe
- Motors 2205 - 2300kv CW and CCW: https://amzn.to/3UIu8CU
- 5 inch 2 blade (or 3 blade) props: https://amzn.to/4bDNcIK
- Battery 3S 1300 - 2200mAh
- 20A ESC
- Servos - MG90D digital metal gear: https://amzn.to/3OL7Blc
- 5 - 6 Channel Receiver
- Colored Packing Tape: https://amzn.to/3OLzWaZ
Specs:
- 29.5 inch (75cm) Wingspan
- 23 inch (58.5cm) Length
- Setup Motors to spin in opposite directions CCW and CW
- Add Motor Differential with the Yaw control (30 - 50% additive)
- CG at the edge of the wing servos
*The PDF plans are on 30" x 20" sheets – just like most standard sheets of foam.