G915 Keycaps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Logitech G813/G815/G913/G915 Keycaps. Only tested on G915.
- Ocena
- 3,4 / 5
- Polubienia
- 60
- Pobrania
- 1134
- Wydruki
- 3
- Wyświetlenia
- 4578
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made them as close the to the original as i could.
Print orientation is important!
For best results i recommend to print them on the top-side surface (it's the shorter one).
If you print them flat they feet will break easily.
Material:
PLA is fine, if you print them upright like in the pictures.
Stronger materials like PETG or ABS will be better i guess.
I used PLA and PETG, both worked fine.
Printer:
I used a Bambolap P1S: 0.20 mm layer height or 0.08mm are both really good.
A Resin printer would make even nicer parts, but i'm not sure about the feet, maybe its to brittle.