GPSC - General Purpose Seatpost Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This seatpost clamp is designed for 27.2 mm seatposts and M5 hardware, allowing you to mount anything you want to it.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 442
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
This seatpost clamp is designed for 27.2 mm seatposts and M5 hardware, allowing you to mount anything you want to it. I'd suggest printing this in PETG, due to this material's flexibility. I used 4 walls and 100% infill, which still allowed me to carefully slide the GPSC around the seatpost.
I would use a minimal amount of support material underneath the upward curve of the mounting arm.
Support
If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link: https://s.click.aliexpress.com/e/_oFT8Gq6
Whenever you buy something through this link, I get a small kickback without costs for you ;)
Thanks for your support!