Phone Stand (No MMU or AMS Needed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The stand is designed to hold the phone with or without a case. Accents on the side are printed separately
- Ocena
- 4,937 / 5
- Polubienia
- 3515
- Pobrania
- 25 424
- Wydruki
- 307
- Wyświetlenia
- 75 792
- Oceny
- 268
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added a version with the accent embedded in the model MMU or AMS is needed unless you want to try and do a manual filament change
The stand is designed to hold the phone with or without a case. Accents on the side are printed separately and fitted in after being printed
No MMU or AMS is needed for dual-color print.
Accents are a tight fit so position them into place and push down on a hard flat surface for a flush fit.
Two more accent options with adjusted tolerance for people who are having issues with fitting them in the stand.
0.4mm Nozzle
Recommended 0.20mm layer height
Can be printed with or without bed supports for the bottom accent channel.
8% infill
May need a brim for Accents