RC Car (Drift) Wheels - 12 mm Hex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My modular wheel design. Can be used as a "naked" wheel for drifting or combined with TPU tires. Fits 12 mm hex carriers
- Ocena
- 5 / 5
- Polubienia
- 159
- Pobrania
- 1441
- Wydruki
- 3
- Wyświetlenia
- 4197
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Initially, I designed this wheel for on-road drifting.
I created it for the Traxxas E-Revo 1/16 (VXL), but it may also fit other RC cars with a 12mm hex wheel carrier.
The front wheels are slightly narrower to provide enough steering clearance.
If you want the left and right wheels to have the same spoke orientation, you can mirror one wheel on each side in the slicer.
I recommend printing with the nice side facing up so that the support material leaves its marks on the inside.
In addition to just blank wheels, you can also browse my other models for TPU tires that can simply be slipped onto the wheels.
Since they don't require glueing, you can interchange them or switch back to bare drifting wheels.
Have fun getting sideways - Happy Printing!