Guitar Backplate - Jackson Dinky
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement backplate with access hole to tremelo setup for Jackson Dinky guitars
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement backplate for a Jackson Dinky guitar with an access hole to make adjustments to (in my case) a Tremol-No. Could also be used to access other tremelo stabilizers or blocks. It may work with other models, but I can't say 100%.
Dimensions are:
143mm x 93mm x 2mm
I've rounded the inside edges to keep any sharp corners from cutting your fingers while using it. May need some post-cleanup to get rid of any sharp points from printing.
I printed at .12 layer height just to make sure screw holes were solid, but you can probably get away with .20