1 / 4
Ikea Äleby swiwel chair foot replacement part — zdjęcie 1
1 / 4

Ikea Äleby swiwel chair foot replacement part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement part for the Ikea Äleby swiwel armchair. This goes into the bottom of one of the five legs inside the…

Ocena
5 / 5
Polubienia
11
Pobrania
60
Wydruki
1
Wyświetlenia
477
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Replacement part for the Ikea Äleby swiwel armchair.

This goes into the bottom of one of the five legs inside the hollow tube. If there is plastic in the hole, just pull it out with a screw or alike before inserting this replacement part.

The height of the foot (without the insert-part) is 6mm, since Ikea chair feet are known to be uneven in height, just scale the Z-axis to match the height of the broken foot.

So if your foot is 5,8 you find the Z-scale by the calculation: 5,8/6*100 = 96,67%

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Yes

Supports:

No

Resolution:

0,12

Infill:

30


Filament:

Spectrum PLA Shiny Black

Notes:

I used a brim as the bottom of the foot is cut in lines, which had issues sticking to my bed.
But you can print it without if your adhesion is good and suffers from minimal warping.

Category: Replacement Parts

Tagi