1 / 4
Ikea Äleby swiwel chair foot replacement part — image 1
1 / 4

Ikea Äleby swiwel chair foot replacement part

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement part for the Ikea Äleby swiwel armchair. This goes into the bottom of one of the five legs inside the…

Rating
5 / 5
Likes
11
Downloads
60
Makes
1
Views
477
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Replacement part for the Ikea Äleby swiwel armchair.

This goes into the bottom of one of the five legs inside the hollow tube. If there is plastic in the hole, just pull it out with a screw or alike before inserting this replacement part.

The height of the foot (without the insert-part) is 6mm, since Ikea chair feet are known to be uneven in height, just scale the Z-axis to match the height of the broken foot.

So if your foot is 5,8 you find the Z-scale by the calculation: 5,8/6*100 = 96,67%

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Yes

Supports:

No

Resolution:

0,12

Infill:

30


Filament:

Spectrum PLA Shiny Black

Notes:

I used a brim as the bottom of the foot is cut in lines, which had issues sticking to my bed.
But you can print it without if your adhesion is good and suffers from minimal warping.

Category: Replacement Parts

Tags