Rival MT10 V2 Front Bumper Braces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the front bumper on the Team Associated Rival MT10 V2
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 564
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed mine in Overture TPU. It's a little squishy but should absorb hits and I never have to worry about breaking it again. 100% infill is probably excessive but I did it anyway. It may work in PETG but I don't know if it will be strong enough.
No supports required. Re-use the original mounting hardware. If you also print the shock absorber you will want to use 2x m3 x 20mm screws and 2x nylock nuts. TPU is not strong enough to hold onto the screw by itself. I like those screws because they are 12.9 and have high tensile strength.
The new front bumper will also work with the stock “shock absorber”. However, I did not try the the new “shock absorber” with the stock bumper.
V2: Added pegs to tie all pieces together. These require a little support but are easy to snip off. The shock absorber is not 100% infill to add a little extra flex on crashes but still plenty strong..