Liczymy pasujące modele…
Update 16/01/2023 : new designs stronger. Here are parts to convert the nitro MGT or MTA to brushless power ! I recommend to print the motor mount with ABS 100% infill. It's better than PLA because of high temp reached by the motor. Here…
Recommended: material ABS 5 perimeters 50% infill
I designed the height insert for the OpenBuggy to keep the build as affordable as possible. With the 0‑height insert, I ran into an issue where the clearance between the diff and the gear was too small, so I lowered it by 1 mm. Now…
just the spare for the steering part of the radio
This is a replacement for the failure prone, and currently unavailable, T7 front body mount. I wanted a replacement that was somewhat aesthetically pleasing so I made my own. Print these out of TPU if you want nearly indestructible, or…
I recently updated my old 2009 Associated SC10 to the new SC7, which is designed to use "shorty" LiPo packs. I didn't want to throw my old, standard-size batteries away, so I designed this tray for them. Fits standard-size 2S LiPo…
porta lipo per associated b6.4 2023 modificato per lipo 2s standard
A rear diffuser and suspension link for the TC4 touring car. I made this in 2 parts so that each component could be modified and adjusted individually (make a body mount on the upper half later) this is lengthened so that it looks decent…
Team Associated decided to change the B7 to use bigger outdrives however didnt bother to make the little dust cap any bigger so it usually just falls out or atleast doesnt work as intended by keeping any dust out. I designed this to fit…
Replacement part for the front steering of my 30 year old RC10 model car from Team Associated. A few days ago a plastic part from the steering broke and i redesigned it in blender. It fits fine and a first test drive showed no problems.…
Car stand for 1/10th scale offroad rc cars. This car stand has a Team Associated branding. You also need six M3x10 screws and 6 nuts to screw the two halfs together. The Team Associated letters must be printed out separately and in an…
Associated B64 Wing Holder. Print: - Hard TPU !!! - No Support
B6 Bulkhead Ist jetzt nur eine einfache gerade Version die sogar bei einigen neuen Modellen mit 0° Standart ist. Wer unbedigt die 25° oder 30° haben möchte muß dann das Original kaufen ;) ---------- It is now just a simple straight…
Front Bumper for some RC-Cars from Associated. Print with Support
A stock Team Associated Pro4 SC10 does not have a good way to secure ‘shorty’ 2S LiPo batteries, which are popular for racing and come in much higher C ratings than the standard basher style batteries. So I designed these adapters to use…
MT10 Body cover tesla truck shape, team assosiated printed with TPU filament, other filaments will break, TPU holds forever. with max parameters 4-5, 100% fill, no support needed for printing, this is the best part for TPU. (top surface…
This front bumper support for the Team Associated SC6.4 Short Course Truck will not break and has similar stiffness to the original plastic piece. Since it is made from TPU, it is extremely tough and the damping properties of the material…
I added in some extra material into the middle of Chad's excellent B74.1 tower guard to make it fit the B74.2. As with the original, best printed in TPU for resilience and protection.
As it's now common place to use shorty batteries and run the ESC at the back of the battery tray, these mounts place simply over the existing standoffs and allow the use of an o-ring to hold the battery in.
As it's now common place to use shorty batteries and run the ESC at the back of the battery tray, this is a shorty battery strap.
These simple pieces allow you to use carbon fiber battery hold-down ‘tabs’ in the Team Associated Pro4 SC10 for ‘shorty’ style batteries, like these tabs for the TLR 22x4 4WD buggy : The pieces have a single hole each for a countersunk…
Quickly remixed my other bumper so I could put a gopro mount on my RC truck for videos of me chasing my daughter around with it. EDIT: Just Realized it needs a nut and stuff for the gopro screw to go into, DOH! Category: R/C Vehicles
First attempt at making a part for my Team Associated RC Race Truck . This is based on the RPM wide bumper I already had. It's also my first print using PTEG and I'm hoping it will take a little bashing before I have to print another one.…
Replacement bumper for RC10B7 offroad RC car from Team Associated. Recommend PETG or more robust material.
Simple tool to remove the caps, it fits a bit loose but grips very well. I printed mine in ASA, but I'm sure any material will work.
Now that saddle packs are history. Time to go back to the original strap for standard size packs. But wait, what do you mean you lost the original parts? They are not manufactured anymore? Can't find them anywhere? Worry not. Here they…
A battery wall (without ESC tray version) to go along with your standard pack lipo battery. Original design by Burak Ozcan
Print pin in pla or petg tower and bumper in tpu
Use Petg or Abs with 50% infill 0.15 layer height Use rubber oring 1mm diameter
Adeno-Associated Virus Serotype 9 (AAV9) – 3D Model This is a 3D model of the Adeno-Associated Virus (AAV), serotype 9, based on surface scan data from the Electron Microscopy Data Bank (EMD-23973). The model is ideal as an educational…
these tires are designed for the team associated sc28 trucks with the terrible foam tires. they are made to work on carpet tracks or similar. they do not work on hardwood floors due to the suggested tpu filament choice. for now, you cant…
These are Team Associated DC10 body mounts. I made these to fit the Team Associated Nissan 400Z body onto this chassis, but they may be useful for you as well. I had no intention of sharing these, so never took formal pictures. Sorry. I…
print in 0.15 100% full filled in pla abs or petg add 0.5mm shim and 20mm m3 hex screw for rear arm
I designed the height insert for the OpenBuggy to keep the build as affordable as possible. With the 0‑height insert, I ran into an issue where the clearance between the diff and the gear was too small, so I lowered it by 1 mm. Now…
just the spare for the steering part of the radio
This is a replacement for the failure prone, and currently unavailable, T7 front body mount. I wanted a replacement that was somewhat aesthetically pleasing so I made my own. Print these out of TPU if you want nearly indestructible, or…
Print in petg 0.15 layer face down 100% infill no broken chassis at this time drill 3mm holes to chassis. No broken chassis at this time and no broken wedge B printed part
I once again broke the steering rack on my rc18b2 buggy, same part always seems to break. I've looked for alternatives, but there only appears to be an aluminum one that goes for 50+ dollars. Needless to say I didn't want to wait the few…
I recently updated my old 2009 Associated SC10 to the new SC7, which is designed to use "shorty" LiPo packs. I didn't want to throw my old, standard-size batteries away, so I designed this tray for them. Fits standard-size 2S LiPo…
Quick little design for a holder for six bottles of Team Associated Shock and Diff oil. If anybody wants another logo embossed in the front please leave a comment and I'll see what I can do. Update I've now uploaded a 12 bottle version of…
opened inside for batteries requiring a balancing cable. allows for more battery options
When I finished my price tags and the associated labels, I was in the need to find a box to store all this staff. An old cigar box I kept in my workshop since several years appeared the best choice. Some adjustments were necessary. I…
Replacement Antiroll/Sway Bar for the Team Associated B6/B6D. It's only the bit that sits on the back of rear gearbox but can be easily damaged/broken. Its not the most cosmetically pleasing model but its functional. Best printed in ABS…
2mm Gearbox Shim for the Team Associated B6. It allows your gearbox to sit 2mm higher which helps keep the drive shafts more level when running low ride heights. You can either print the STL file that has all 4 together or 3x lower…
Spur gear cover for a Team Associated B6. Its designed to protect your spur gear, either from bits hitting it or the shell rubbing it. It attaches to the gearbox & can use the same bolts, just remove from the opposite side and screw in.…
This is a Bulkhead shim for a Team Associated B6 / B6D. It goes between the chassis & bulkhead, you can choose between 0.5mm & 1mm. It provides a smoother steering response and increases mid-corner steering. Some may find 1mm to…
This is a shell guard for your Team Associated B6, it help to stop your shell from hitting your spur gear. No extra screws required, I just use bigger hex bolts to help reduce rounding. Print Settings Printer Brand: Wanhao Printer: Wanhao…
After being unable to locate the battery strap for my Team Associated SC10 RC Truck, I took measurements of the chassis and designed this replacement. The truck has long since been discontinued and I'm unsure if this same part will fit…
RC Suspension hanger pill organizer with snap in top and space in center for additional storage. Will work with 10th scale cars that use inserts on the A thru D blocks. Examples) B6/B6.1/B6.2/B6.3/B6.4 T6.1/T6.2 SC6.1/SC6.2 B64/B74/B74.1…
Battery hold down strap for RC10 B2 and RC10 B3 2WD R/C Buggy Want More Free Designs? Like and comment. Thanks!
this is a cad recostruction of a real rc car, so some pieces cannot be printed for a good mechanical functionality (Aluminum or upper) for a correct download of all files , download the .zip file
Team Associated Rival MT10 replacement side Exhaust pipes.
Dies ist ein Spoiler für einen Team Associated B 4.2 . Er wird wahrscheinlich auch bei anderen Modellen passen. Ich habe diesen mit TPU von Filamentworld gedruckt. Infill 70%
These bands can be slid over the tires on Associated SC28 to add even more fun to an already righteous rc truck. Printed in TPU at 0.3mm layer, they're just thick enough for two perimeters with 0.4mm nozzle. Could be scaled for bigger…
Simple external shock shaft spacers for team associated or other makes with 3mm diameter shock shafts. Known fitments are for the b6.4, and sc6.2 but should fit other TA vehicles. Best to print multiples at a time with rafts to help bed…
Need to print one of each mount and two of the bushings. Additional parts needed: ASC81587 Shock Kit MIP23400 Piston Kit 60W Associated Shock Oil (800cSt) 80W Associated Shock Oil (1000cSt) Starting setup: Throttle Pedal - 60wt oil, green…
Team Associated B74.2 Front Shock Protector. I couldn't find any prints for the latest version of the B74 and there seems to be no official or aftermarket item available here in the U.K. After trying various single shock protectors; I…
Lost your receiver battery box cover? Print it with no supports, orientate according to the way it sits in the car. You may need to encourage the screw holes with a reamer, 3mm drill bit or the m3 bolt itself. Tested with a 2s LiFe hump…
Original design by Burak Ozcan.
I added 1m to the width of the tire to “beef it up" a little bit while adding squish. It also reduces the weight from 6g to 3g per wheel, which improves performance since the car is about 120g and the total weight is reduced by 10%. These…
More traction and more squish. Make sure to chase the shaft insertion hole with a 2mm drill bit.
More squish = More traction If you have the TR28 wheels, you can use the Nanosport street tires since they are the same size. Make sure to chase with a 2mm drill bit.
A very sturdy jack stand / test stand for my Monster gt, and other rc cars/trucks. Holds it very snug and firm off the ground to get it warmed up and tuned. works very well. I am not good at cad but learning. ****The cut outs in the base…
This is a rear body post adapter allowing you to run a team associated Reflex 14T Truggy body on your 1:16 mini revo. On the lowest post setting this adapter and and body combo still clears the hot racing sway bar kit (front and rear)…
Rollbar Collar for the new B7, the prices Team Associated charge for these little bits of blue is quite staggering so if you lose one or just dont wanna buy, then download these. Theres a big and small for bigger and smaller rear…
The new B7 battery mount system is pretty good actually but with my low profile batteries there was quite a bit of vertical play, obviously I could put some foam etc but decided I'd try to create an oring mount. You'll need a 61mm (inside…
porta lipo per associated b6.4 2023 modificato per lipo 2s standard
This file was scanned from a newly purchased MT28 body from Team Associated. I am using it for designing a new AE 28th scale chasses.
I purchased a new, clear SC28 body from Team Associated to scan. The purpose is to design a new AE 28th scale chassis to look like it fits under the Short Course Truck body.
I got a used RC8B3e with out a battery tray. so i try to make one on thinkercad Need a flathead self-tapping screw
Direct drop in for the broken steering rack. this however does warrant the use of a servo saver since the original linkage is “supposed” to be a servo saver itself. Works best with Kimbrough 201 size servo saver, but this does require…
Needed places to mount my receiver and my I-Laps transponder. I decided to integrate them into this backbone so that it would stiffen up the entire chassis all in one go. The ESC just tapes onto the foot of the riser part and is able to…
A rear diffuser and suspension link for the TC4 touring car. I made this in 2 parts so that each component could be modified and adjusted individually (make a body mount on the upper half later) this is lengthened so that it looks decent…
I recently lost a shim in the grass at the track when changing the toe, turns out you'd have to buy brand new rear arms to get more plastic shims!! so I designed these. The kit ones are 2mm, so if you want replacements, then print a load…
This is what a Team Associated GT2 32P 64T spur gear would look like if it existed. I ran a 56T (ASC7957) but needed a bigger one so i made one using Fusion 360. This is HALF of it, print it twice and then use the 3 holes to screw some M3…
Team Associated decided to change the B7 to use bigger outdrives however didnt bother to make the little dust cap any bigger so it usually just falls out or atleast doesnt work as intended by keeping any dust out. I designed this to fit…
