Axle Scoring Jig for Pinewood Derby Cars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a miter box jig to hold derby axles that allows a groove to be scored in the nail heads using a hack saw.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 1023
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a miter box jig to hold derby axles that allows a groove to be scored in the nail heads using a hack saw. The is no hardware needed as the clamping force is provided by the user as they grip the handle. To release the axles the jig can be opened by hand. There is also a flat surface to allow for clamping to a table. It is also vice compatible. The idea behind it was something simple packs could use without any other equipment besides a hack saw.
The slot for the hack saw blade is intentionally undersized so you can widen it to your specific blade during its first use.
Print Settings
- Material: PETG
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Perimeters: 3
- Infill: Gyroid 20%
- Supports: None
Encouragement
If you like what I'm doing consider buying me a coffee:
