Prusa Steathburner Bed Modification
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed Modification to reclaim all bed space since the stealthburner sits farther foward than the Prusa one.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mod to move the bed linear bearings to account for the stealthburner tool head since it sits farther forward than the original Prusa toolhead. This allows the bed to stop 10mm forward when far back and 25mm farther forward. The belt tensioner is also moved back 25mm so it doesn't hit the idler pulley. This also raises the bed by 5mm to allow for the bearings to be moved. Use the original bearing block holders for this. I didn't notice any negative affects in print quality after i added this.
For hardware, m3x12 is needed for the two bearings blocks and m3x20 for the single bearing. m3x12 is also used to attach the double bearing holder to the bed frame. You might need more but i do not remember since i have had this on my printer for a while already for testing.
Printer Settings:
I used 3 walls and 15% infill. It might be beneficial to do more but i did not and it seems to work fine.