Whirlpool Creater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Place this over the drain at the end of your bath and wait for a whirlpool to form.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I added a clockwise and counter clockwise model for the spiral direction but the water drains so slowly at first that I don't think it will matter so much.
This does need supports to print however it only look me 2 hours.
Print at 100% infill so its less likely to float at the start and .2 layer thickness.
I sorta made this model because i took a while to think about what i wanted to make for the competition and it was made quickly, but I wanted to at least make one with a bit more decoration so here is that one: