1 / 1
Whirlpool Creater
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Place this over the drain at the end of your bath and wait for a whirlpool to form.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 42
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
I added a clockwise and counter clockwise model for the spiral direction but the water drains so slowly at first that I don't think it will matter so much.
This does need supports to print however it only look me 2 hours.
Print at 100% infill so its less likely to float at the start and .2 layer thickness.
I sorta made this model because i took a while to think about what i wanted to make for the competition and it was made quickly, but I wanted to at least make one with a bit more decoration so here is that one: