Adata XPG case board holder for SSD/HDD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adata XPG case board holder for SSD/HDD
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
It has been design in Fusion 360 for my board but i included the OBJ file if you need to modify it, i had printed it with a resin printer from AnyCubic, i'm posting this so that maybe it could help somebody that also had his/hers external hdd/ssd case broken.
Print Settings
Printer Brand:
Anycubic
Printer:
Photon
Rafts:
No
Supports:
No
Resolution:
0.100
Infill:
100
Filament: AnyCubic Resin Gray
Notes:
Slicer used is Chitubox, and this is all my settings i have used to print this
Layer height:0.100 mmBottom layer count: 3
Exposure time: 15 S
Bottom exposure time: 40 S
Light-off delay: 0 S
Bottom lift distance: 5 mm
Lifting distance: 5 mm
Bottom retract distance: 5mm
Retract distance: 5 mm
Bottom lift speed: 65 mm/min
Lifting speed: 65 mm/min
Bottom retract speed: 150 mm/min
Retract speed: 150 mm/min
Post-Printing
Wash it in IPA 95% or higher
Just give it a good wash then let it cure in the UV station about 10 min.
Category: Computer