Syringe Wale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little syringe wale to play with in your bathtub.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a little syringe wale to play with in your bathtub. Push on the tail plunger to squirt water out of its blowhole.
Filament: Use a filament that doesn't immediately soften in warm bathtub water. PETG is probably fine. ASA could be preferable.
Printing: Orient the parts for printing as shown in the preview image. Print in the colors you want. Use some supports on the opening of the tail hole as shown in the preview image. For strong parts, print with a total wall thickness of ~2.5mm (4 perimeters with a 0.6mm nozzle).
Assembly: Glue the upper and lower body toghether. Glue the left and right fins to the lower body. Stick short segments of filament into the eye sockets as eyes. Insert the tail plunger into the body.