Prusa XL "Scrappy" exhaust cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a light weight and cheap exhaust (and dust) cover for the prusa XL. There are more add ons to this
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 767
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Attention - please read the update below.
This model is the cover for the Prusa XL which can be easily created and extended for little money. The printer is of course fully operational with the cover and the cover allows to collect all fumes from printing as well as protecting the printer from dust.
The cover is mostly made from cardboard with a few printed parts. Cardboard cutting instructions are in the attached PDF.
The PDF also explains in detail why the cover is useful&healthy.
Oh and - sorry, but there are only very few printable parts for this, but it can be easily extended with printable parts!
Fan & Filter:
https://www.printables.com/model/779722-exhaust-filter-with-fan-enclosure-for-3d-printers
Camera view:
https://www.printables.com/model/779737-camera-opening-addition-for-xl-exhaust-cover
Window:
https://www.printables.com/model/788611-prusa-xl-exhaust-cover-an-additional-window
Update 08/28/2024
I was chasing a problem for months and was just informed by Prusa that if one uses an enclosure, parts of the nextruder might need to be updated with PC-CF parts if the temperature for the toolheads exceeds some magic number (38C(?)). So be careful if you use any closed cover/enclosure - or - print these following parts with PC-CF first:
https://www.prusa3d.com/product/idler-nut/
https://www.prusa3d.com/product/idler-swivel/ (two pieces per extruder)
https://www.prusa3d.com/product/idler-leverb/
https://www.prusa3d.com/product/idler-levera/
https://www.prusa3d.com/product/belt-clamp/ (two pieces per printer)