1 / 4
Spool Hubs for Overture and Prusament Filament and 30mm OD Bearings — zdjęcie 1
1 / 4

Spool Hubs for Overture and Prusament Filament and 30mm OD Bearings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple spool hub sized for filament reels from Overture and Prusament, intended for a 6903-2RS bearing.

Ocena
0 / 5
Polubienia
4
Pobrania
24
Wydruki
0
Wyświetlenia
283
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

A simple spool hub sized for Overture cardboard filament reels, intended for a 6903-2RS 17x30x7mm bearing. The Overture hub ID is slightly over 55 mm; this is sized to fit with a nice snap fit.

This pairs nicely with thick-wall aluminum tubing 17mm in outer diameter, used as a spool support.

A Prusament version is also provided.

No supports needed.

Two versions of each hub (Overture, Prusament) are available: 

  • one that is solid/simple, and 
  • one with gratuitous and silly “speed holes”, just for fun.

 

 

Tagi