1 / 4
Spool Hubs for Overture and Prusament Filament and 30mm OD Bearings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple spool hub sized for filament reels from Overture and Prusament, intended for a 6903-2RS bearing.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A simple spool hub sized for Overture cardboard filament reels, intended for a 6903-2RS 17x30x7mm bearing. The Overture hub ID is slightly over 55 mm; this is sized to fit with a nice snap fit.
This pairs nicely with thick-wall aluminum tubing 17mm in outer diameter, used as a spool support.
A Prusament version is also provided.
No supports needed.
Two versions of each hub (Overture, Prusament) are available:
- one that is solid/simple, and
- one with gratuitous and silly “speed holes”, just for fun.