HO Scale Trackside Relay Cabinet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An HO scale (1:87) trackside American relay cabinet
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 604
- Wydruki
- 1
- Wyświetlenia
- 1409
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is an HO scale (1:87) model of a typical American trackside relay cabinet used to house signal, switch, and crossing relays and electronics. This is a model that I made based on prototype dimensions. Approximately 3.5-4 scale feet tall. The model has holes in the bottom to stick metal rods or solid wires (to a piece of foam board) for mounting. Additionally it could just be mounted with glue.
I printed this on the Prusa MK3S+ with 0.25 nozzle and thinnest layer height. The details of the model are lost in the size of the layers, so I would recommend using an SLA printer, which I didn't use because I don't have one. If you do have one, then you would most likely get much better quality.