Snap-On Torx Screw Cap/Cover - various size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a definitely over engineered Torx screw cap that should fit by pushing it onto the screw.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 260
- Wydruki
- 1
- Wyświetlenia
- 875
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Welcome to the over-engineered Torx Screw Cap design. It prints without support and has a squeezable pin with a 0.4 mm slit for adjusting to screw imperfections. It includes an external lip for covering screws that aren't completely flush.
Features include:
- Squeezable pin with 0.4 mm slit for easy screw adjustment.
- External lip to cover non-flush screws.
- Parametric Fusion 360 file for additional customization (check "modify / parameters" for size adjustments).
- It prints in 59 seconds on my X1C
After long and intensive research on the Internet to try to find the bloody internal diameter of the screws I came across this clear and high resolution image of the sizes:
And possibly like me since you might not speak what I suspect is Chinese, it's the column B.
I'm including the models for T8, T9, T10, T15, T20, T25. Only T15 and T20 have been tested as I don't have the other screws to test and have already passed too much time on this.
I printed at 0.2mm, solid (use 3 walls for example).