1 / 6
RatRig VZ Printed Toolhead MGN12C (UNTESTED)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VZ printed toolhead for RatRig V-Core 3.1
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 910
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (21)Powiązane
Hello!
Here is another version of the VZ printed toolhead compatible with RatRig V-Core 3.1.
As mentioned by @UjangKarnadi_294653 in his original post, please refer to vz printed printhead for assembly, print settings and belt clips.
Top features:
- MGN12C only;
- 3010 or 4010 hotend cooling fan support;
- Phaetus Rapido UHF V1 or V2 + Orbiter V2 only, they bolt directly to the top plate, no adaptors needed, less parts;
- 4028 or CPAP cooling;
- kept the same ADXL mounting location as RatRigs EVA toolhead (heat inserts required);
- might be required to remove the metal lever of the endstop switch, mine rattled a lot. If not, the arm included in the mount can be cut off;
- another method of belt tensioning is required;
- .step files included;
- to avoid 2 different top plates, the holes for mounting the ducts for 3010 or 4010 fan have 2 options:
- for 3010 fan duct, install 2 heatsert from the bottom into the top plate;
- for 4010 fan duct, use longer countersunk M3 bolts, insert them from the top, before mouting the extruder, and thread them into the plastic of the duct;
Please note that I have not been able to test this toolhead as I do no longer have the required linear rail. It has been designed as a users request, which will also help in testing it. Of course, any feedback is welcomed, design will be altered if necessary and/or requested. Thank you!