1 / 6
Spool Accessory with Desiccant and Filament Clip pockets — zdjęcie 1
1 / 6

Spool Accessory with Desiccant and Filament Clip pockets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spool Accessory to contain Desiccant Packs and Filament Clip

Ocena
0 / 5
Polubienia
1
Pobrania
20
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This filament accessory is designed to comfortably contain 3 (or more) desiccant packs in the center of your filament spool.  With this accessory the desiccant packs will no longer fall out of the spool in storage or in use.  Included is a filament clip to make storage of  your filament a cinch.  There is a stowage pocket for the filament clip in the side of the accessory; so, you will never misplace your filament clip again.  I’ve tested this accessory with several brands of filament (eSun, Matterhackers, Generic Brands, Raise3D, Bambulab, et) so, this accessory should be useful for most any modern filament spool. 

 

No additional supports, brims or skirts needed.  I printed parts  you see in ABS but, any material would work. 

Tagi