Brio Musical caterpillar note block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Missing one or two block? I made replacement model for the Brio's catepillar.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This model requires a magnet measuring max 10mm diameter 2mm height, neodymium recommended. The magnet is inserted into the print at layer 20. The note piece can be inserted to the base by hand, if more pressure is needed press ligthly against a table or equivalent hard surface.
The seam seen in the picture of the base is an error due to using Aligned seam position by mistake, with random seam position it is almost invisible.
Filament used for the base was Prusament Mango PETG. Note made with generic PLA.
The base printing settings:
Make pause at layer 20
PLA (or PETG, ABS)
Quality/layer height 0.15mm
Perimeters 6
Infill 20% (honeycomb)
Seam position Random
No brim or support
Printing time ~2h 32min
The musical note printing setting:
PLA (or PETG, ABS)
Quality/layer height 0.10mm
Perimeters 3
Infill 15%
Seam position Aligned
No brim or support
Printing time ~14min