1 / 6
Handle for v-slot 2020 with M5 screws — zdjęcie 1
1 / 6

Handle for v-slot 2020 with M5 screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

v-slot 2020 handle with 20mm width

Ocena
0 / 5
Polubienia
11
Pobrania
73
Wydruki
0
Wyświetlenia
327
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

About

V-Slot 2020 Handle with M5 screws, with a width of just under 20mm so it is not wider than the v-slot profile.

Original handle was too wide so I just removed the parts between the screw holes and the handle edges.
Also usable as handle for V-Slot 3030, makes pretty decent handle for my Prusa Mini+ :)

Please give a like and post makes and provide comments for further improvements.

Print

  • notice gcode contains moves for my custom timelapse video capture (print head moves to back and then to Z axis), so provided gcode file is just for rough estimation of the print time + required filament,
  • 0.2mm layer, 0.4 nozzle can be speed profiles
  • 3D honeycomb 10% makes is quire sturdy
  • recommended to print horizontal with support for extra strength for lifting
  • might be possible to print it upside down without supports, did not test it.

Tagi