1 / 6
Handle for v-slot 2020 with M5 screws
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
v-slot 2020 handle with 20mm width
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 73
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
About
V-Slot 2020 Handle with M5 screws, with a width of just under 20mm so it is not wider than the v-slot profile.
Original handle was too wide so I just removed the parts between the screw holes and the handle edges.
Also usable as handle for V-Slot 3030, makes pretty decent handle for my Prusa Mini+ :)
Please give a like and post makes and provide comments for further improvements.
- notice gcode contains moves for my custom timelapse video capture (print head moves to back and then to Z axis), so provided gcode file is just for rough estimation of the print time + required filament,
- 0.2mm layer, 0.4 nozzle can be speed profiles
- 3D honeycomb 10% makes is quire sturdy
- recommended to print horizontal with support for extra strength for lifting
- might be possible to print it upside down without supports, did not test it.